Notice
Each machine identifies the part that needs to be refueled, the name of the oil, the fueling cycle, etc. in a simple pattern and is responsible for the use of the wrong oil.
1、Do not stand in an open air environment to prevent intrusion of water and debris.
2、The indoor storage can be placed upright with the barrel facing up for extraction.
3、Tighten the closure to keep the drum tight.
4、Keep the barrel surface clean and the mark clear.
5、Keep the floor clean and easy to find when leaking oil.
6、Do a good job in storage registration, first in, first out.
7、Frequently extracted oil is placed on the oil drum rack and controlled by a switch.
8、The new oil is placed separately from the waste oil, and the container filled with waste oil should not be filled with new oil.
1、The oil should be stored in a separate space and no flammable materials should be placed around it.
2、Fireworks are prohibited and fires are not allowed to enter the oil depot.
3、Equipped with not less than two fire extinguishers.
4、Do not accumulate oily cloth or clean oil after wiping the machine.
5、Flammable special oils or chemicals are stored separately and protected from flammable marks.
1、Never drain waste oil directly into the pool or pour it into the soil to prevent contamination.
2、The waste oil waste paint can be collected in a special container and recycled to the recycler approved by the government.
3、Those with skin allergies or trauma should avoid direct contact with the lubricant.
4、Do not wear oil-soaked clothing. Do not put rags contaminated with oil into the bag.
5、Do not use oily rags to wipe the oil on the skin to prevent the metal debris in the rag from scratching the skin and causing infection.
6、Do a good job in storage registration, first in, first out.
7、Frequently extracted oil is placed on the oil drum rack and controlled by a switch.
1、Consult a lubricant expert, use a lubricant of the appropriate size, and minimize the type of oil used.
2、Each machine identifies the part that needs to be refueled, the name of the oil, the fueling cycle, etc. in a simple pattern and is responsible for the use of the wrong oil.
3、Clean the oil pump, oil pot and other containers and tools before each refueling.
4、Use a special container for each type of oil and indicate the name of the oil on the container to prevent contamination.
5、The machine must be rinsed with a solvent before changing the oil. Remember that a water-soluble cleaning agent is not available.
6、Make mechanical maintenance records every time you add or replace lubricants.
7、If the oil is found to be abnormal or to the oil change interval, it should be sampled and sent to the professional company for testing and determination. It should be placed on the oil drum rack and controlled by the switch.